24 / 7 Email Support
Free Registered Shipping Worldwide !
Handmade in Germany !

BIG-STITCH 01

$261.60 *

Prices incl. shipping costs and 19% German-VAT
For Non-EU-Customers: You will get 19% cheaper VAT-FREE price in your cart after choose your country!


For EU-Customers: You will get the VAT-Rate of your EU-Country (OSS-Vat-Rules). The VAT is different in every EU country (from 17 – 27 %)

Free worldwide shipping !

Production time 14 Workdays

Build your own customized Watch Strap
reset

strap-width-faq-en

Sizing Information: The lug width and buckle width sizes are given in millimeters and total length of watch bands is stated in centimeters. Width is the distance between the lugs, where the strap meets the watch. To determine your width, you can take a ruler or caliper, and measure the width of the part of the strap that uses spring bars / screws to attach to your watch case. Measure this in millimeters.Width is expressed, for example like this: 24/22 (24mm wide by 22mm wide). This first number (24mm) is the width of the strap between the lugs of the watch case. The second number (22mm) is the width of the strap at the buckle.

Straight size Straps: “Straight” strap is one that is the same width at the lugs and the buckle, i.e 24/24 (24mm wide at lugs by 24mm wide at buckle). 

Tapered sizes Straps: Tapered straps start out wider at the lugs (the end that attaches to your watch) and narrow (taper) toward the direction of the tail and the buckle. While a “tapered” strap is one that tapers in width from the lugs to the buckle, i.e 24/22 (24mm wide at lugs by 22 wide at buckle).

reset

strap-lengthLS-faq-en

  • There are two lengths required, the Longside (length of long section with holes), and the buckle side (length of short section, excluding buckle).
  • Length is expressed, for example like this: 125/75. The first number (125) is the length in millimeters of the long side with holes. The second number (75) is the length in millimeters of the buckle side.
  •  
  • The strap length suggestion is based on wrist size. To determine the your wrist length, you can simply wrap a piece of string/thread around your wrist at the point where you normally wear your watch, mark the string where it crosses itself, lay it flat on a table and measure the distance between the marks. This is your wrist size.
  •  
  • How do I determine my wrist (length) size?
  • You can simply measure your wrist with a tape measure or a piece of thread. With the thread option, wrap it around your wrist at the point where you would normally wear your watch. Then, lay the thread out flat and measure the distance from the end to your mark on the thread. Next, refer to the length size chart below and choose the size that corresponds with your wrist measurement.
  •  
  • If you measured your wrist and it turns out, for example, that your wrist is exactly 7" which falls at the end of the 6.6" - 7" size range, then definitely choose the strap size that your wrist measurement corresponds to in our size chart below, which in this case would be 125/75. There's no need to go up a size and there are no in between sizes.
  •  
  • Vintage Strap Fitment Guide:
  • The table below is an excelent place to start for help you decide your size length order.
  • 5.6 - 6.0" wrist (142 - 152mm) = Longside 115mm - Buckle side 70mm
  • 6.1 - 6.5" wrist (153 - 164mm) = Longside 125mm - Buckle side 75mm
  • 6.6 - 7.0" wrist (165 - 178mm) = Longside 135mm - Buckle side 80mm 
  • 7.1 - 7.5" wrist (179 - 190mm) = Longside 140mm - Buckle side 85mm 
  • 7.6 - 8.0" wrist (191 - 203mm) = Longside 145mm - Buckle side 85mm
  • 8.1 - 8.5" wrist (204 - 216mm) = Longside 150mm - Buckle side 90mm
  • 8.6 - 9.0" wrist (217 - 229mm) = Longside 155mm - Buckle side 95mm
  • 9.1 - 9.4" wrist (230 - 241mm) = Longside 160mm - Buckle side 100mm
  • 9.5 - 9.9" wrist (242 - 253mm) = Longside 165mm - Buckle side 105mm

UnbenanntA4FdvGkfmFSAR

reset

strap-lengthSS-faq-en

    • There are two lengths required, the Longside (length of long section with holes), and the buckle side (length of short section, excluding buckle).
    • Length is expressed, for example like this: 125/75. The first number (125) is the length in millimeters of the long side with holes. The second number (75) is the length in millimeters of the buckle side.
    •  
    • The strap length suggestion is based on wrist size. To determine the your wrist length, you can simply wrap a piece of string/thread around your wrist at the point where you normally wear your watch, mark the string where it crosses itself, lay it flat on a table and measure the distance between the marks. This is your wrist size.
    •  
    • How do I determine my wrist (length) size?
    • You can simply measure your wrist with a tape measure or a piece of thread. With the thread option, wrap it around your wrist at the point where you would normally wear your watch. Then, lay the thread out flat and measure the distance from the end to your mark on the thread. Next, refer to the length size chart below and choose the size that corresponds with your wrist measurement.
    •  
    • If you measured your wrist and it turns out, for example, that your wrist is exactly 7" which falls at the end of the 6.6" - 7" size range, then definitely choose the strap size that your wrist measurement corresponds to in our size chart below, which in this case would be 125/75. There's no need to go up a size and there are no in between sizes.
    •  
    • Vintage Strap Fitment Guide:
    • The table below is an excelent place to start for help you decide your size length order.
    • 5.6 - 6.0" wrist (142 - 152mm) = Longside 115mm - Buckle side 70mm
    • 6.1 - 6.5" wrist (153 - 164mm) = Longside 125mm - Buckle side 75mm
    • 6.6 - 7.0" wrist (165 - 178mm) = Longside 135mm - Buckle side 80mm 
    • 7.1 - 7.5" wrist (179 - 190mm) = Longside 140mm - Buckle side 85mm 
    • 7.6 - 8.0" wrist (191 - 203mm) = Longside 145mm - Buckle side 85mm
    • 8.1 - 8.5" wrist (204 - 216mm) = Longside 150mm - Buckle side 90mm
    • 8.6 - 9.0" wrist (217 - 229mm) = Longside 155mm - Buckle side 95mm
    • 9.1 - 9.4" wrist (230 - 241mm) = Longside 160mm - Buckle side 100mm
    • 9.5 - 9.9" wrist (242 - 253mm) = Longside 165mm - Buckle side 105mm

UnbenanntA4FdvGkfmFSAR

reset
reset
reset

engraving-strap1

reset
Reset configuration

Information about customer service!

We shipp to Non-EU-Countries with DHL-Express for free. The minimum order value is USD 450 for overseas Express-Shipping. We to ship the Corrigia-Watches to EU-Countries also only with DHL-Express for free (no cost for Express Shipping). Your order will arrive in 1-3 working days. We ship from Monday to Saturday and the On-Stock products will shipped on the same day.


To obtain answers for your inquiries, you can use our contact form or communicate with us through WhatsApp. WhatsApp is an easy way to reach us. Chat on WhatsApp

  • MAT10708
In the "BIG-STITCH" series, we have increased the seam lengths and expanded the uniform look... more
Product information "BIG-STITCH 01"

In the "BIG-STITCH" series, we have increased the seam lengths and expanded the uniform look with modern color accents of the seam.
For this series we have used a soft and natural oil tanned leather from Italy with a fat content of 18-19 percent.

Width and Thickness

  • The length and width can be configured by the strap configurator.
  • The thickness of the Strap is automatically recognized by Corrigia based on the chosen width and folding technique in the configurator.
  • With a selected width of 24mm to 28mm, the Strap has a thickness of 4mm to 6mm. .
  • With a selected width of 21mm to 23mm, the Strap has a thickness of 3mm to 4mm.
  • With a selected width of 18mm to 20mm, the Strap has a thickness of 2mm to 3mm.

Strap holes

  • If you order the Strap without sewn-in Buckle, then the strap holes will be punch for screw-in OEM-Buckle and the 1x loop will be fixed.
  • Number of holes: 5 holes (up to 145mm) or 6 holes (from 145mm)

Production method

  • Each stitching hole is punched by a special awl and Double hand stitched with wax yarn.
  • The buckle and the first keeper sit in a loop
  • A free (loose) keeper
  • Screw-in Buckle type can be selected individually
  • The Strap comes with engraved Wooden Box or Engraved Leather-Case (for DHL-Express)

Used materials

  • Extrem soft and high-quality cowhide (cow leather) from italian tannery.
  • Wearproof and stable wax yarn made in Italy!
  • Beeswax leather balm (resin-and acid-free)
Related links to "BIG-STITCH 01"
Read, write and discuss reviews... more
Customer evaluation for "BIG-STITCH 01"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

BIG-STITCH 04 BIG-STITCH 04
$130.80 * $163.50 *
Heritage12-Caramel Heritage12-Caramel
$130.80 * $174.40 *
BIG-STITCH 02 BIG-STITCH 02
$130.80 * $163.50 *
BIG-STITCH 01 BIG-STITCH 01
$130.80 * $163.50 *
D06 - Smog D06 - Smog
From $98.10 * $152.60 *
Minimo17-Mauve Minimo17-Mauve
$109.00 * $141.70 *
Minimo06-Green Minimo06-Green
$109.00 * $141.70 *
Heritage17-Mauve Heritage17-Mauve
$130.80 * $174.40 *
Heritage16-Lime Heritage16-Lime
$130.80 * $174.40 *
Heritage15-Umber Heritage15-Umber
$130.80 * $174.40 *
Heritage14-Cedar Heritage14-Cedar
$130.80 * $174.40 *
Viewed