24 / 7 Email Support
Free Registered Shipping Worldwide !
Handmade in Germany !

CANVAS 05-BROWN

$244.00 *

Prices incl. shipping costs and 19% German-VAT
For Non-EU-Customers: You will get 19% cheaper VAT-FREE price in your cart after choose your country!


For EU-Customers: You will get the VAT-Rate of your EU-Country (OSS-Vat-Rules). The VAT is different in every EU country (from 17 – 27 %)

Free worldwide shipping !

Production time 12 Workdays

Build your own customized Canvas Strap
reset

strap-width-faq-en

Sizing Information: The lug width and buckle width sizes are given in millimeters and total length of watch bands is stated in centimeters. Width is the distance between the lugs, where the strap meets the watch. To determine your width, you can take a ruler or caliper, and measure the width of the part of the strap that uses spring bars / screws to attach to your watch case. Measure this in millimeters.Width is expressed, for example like this: 24/22 (24mm wide by 22mm wide). This first number (24mm) is the width of the strap between the lugs of the watch case. The second number (22mm) is the width of the strap at the buckle.

Straight size Straps: “Straight” strap is one that is the same width at the lugs and the buckle, i.e 24/24 (24mm wide at lugs by 24mm wide at buckle). 

Tapered sizes Straps: Tapered straps start out wider at the lugs (the end that attaches to your watch) and narrow (taper) toward the direction of the tail and the buckle. While a “tapered” strap is one that tapers in width from the lugs to the buckle, i.e 24/22 (24mm wide at lugs by 22 wide at buckle).

reset

strap-lengthLS-faq-en

  • There are two lengths required, the Longside (length of long section with holes), and the buckle side (length of short section, excluding buckle).
  • Length is expressed, for example like this: 125/75. The first number (125) is the length in millimeters of the long side with holes. The second number (75) is the length in millimeters of the buckle side.
  •  
  • The strap length suggestion is based on wrist size. To determine the your wrist length, you can simply wrap a piece of string/thread around your wrist at the point where you normally wear your watch, mark the string where it crosses itself, lay it flat on a table and measure the distance between the marks. This is your wrist size.
  •  
  • How do I determine my wrist (length) size?
  • You can simply measure your wrist with a tape measure or a piece of thread. With the thread option, wrap it around your wrist at the point where you would normally wear your watch. Then, lay the thread out flat and measure the distance from the end to your mark on the thread. Next, refer to the length size chart below and choose the size that corresponds with your wrist measurement.
  •  
  • If you measured your wrist and it turns out, for example, that your wrist is exactly 7" which falls at the end of the 6.6" - 7" size range, then definitely choose the strap size that your wrist measurement corresponds to in our size chart below, which in this case would be 125/75. There's no need to go up a size and there are no in between sizes.
  •  
  • Vintage Strap Fitment Guide:
  • The table below is an excelent place to start for help you decide your size length order.
  • 5.6 - 6.0" wrist (142 - 152mm) = Longside 115mm - Buckle side 70mm
  • 6.1 - 6.5" wrist (153 - 164mm) = Longside 125mm - Buckle side 75mm
  • 6.6 - 7.0" wrist (165 - 178mm) = Longside 135mm - Buckle side 80mm 
  • 7.1 - 7.5" wrist (179 - 190mm) = Longside 140mm - Buckle side 85mm 
  • 7.6 - 8.0" wrist (191 - 203mm) = Longside 145mm - Buckle side 85mm
  • 8.1 - 8.5" wrist (204 - 216mm) = Longside 150mm - Buckle side 90mm
  • 8.6 - 9.0" wrist (217 - 229mm) = Longside 155mm - Buckle side 95mm
  • 9.1 - 9.4" wrist (230 - 241mm) = Longside 160mm - Buckle side 100mm
  • 9.5 - 9.9" wrist (242 - 253mm) = Longside 165mm - Buckle side 105mm

UnbenanntA4FdvGkfmFSAR

reset

strap-lengthSS-faq-en

    • There are two lengths required, the Longside (length of long section with holes), and the buckle side (length of short section, excluding buckle).
    • Length is expressed, for example like this: 125/75. The first number (125) is the length in millimeters of the long side with holes. The second number (75) is the length in millimeters of the buckle side.
    •  
    • The strap length suggestion is based on wrist size. To determine the your wrist length, you can simply wrap a piece of string/thread around your wrist at the point where you normally wear your watch, mark the string where it crosses itself, lay it flat on a table and measure the distance between the marks. This is your wrist size.
    •  
    • How do I determine my wrist (length) size?
    • You can simply measure your wrist with a tape measure or a piece of thread. With the thread option, wrap it around your wrist at the point where you would normally wear your watch. Then, lay the thread out flat and measure the distance from the end to your mark on the thread. Next, refer to the length size chart below and choose the size that corresponds with your wrist measurement.
    •  
    • If you measured your wrist and it turns out, for example, that your wrist is exactly 7" which falls at the end of the 6.6" - 7" size range, then definitely choose the strap size that your wrist measurement corresponds to in our size chart below, which in this case would be 125/75. There's no need to go up a size and there are no in between sizes.
    •  
    • Vintage Strap Fitment Guide:
    • The table below is an excelent place to start for help you decide your size length order.
    • 5.6 - 6.0" wrist (142 - 152mm) = Longside 115mm - Buckle side 70mm
    • 6.1 - 6.5" wrist (153 - 164mm) = Longside 125mm - Buckle side 75mm
    • 6.6 - 7.0" wrist (165 - 178mm) = Longside 135mm - Buckle side 80mm 
    • 7.1 - 7.5" wrist (179 - 190mm) = Longside 140mm - Buckle side 85mm 
    • 7.6 - 8.0" wrist (191 - 203mm) = Longside 145mm - Buckle side 85mm
    • 8.1 - 8.5" wrist (204 - 216mm) = Longside 150mm - Buckle side 90mm
    • 8.6 - 9.0" wrist (217 - 229mm) = Longside 155mm - Buckle side 95mm
    • 9.1 - 9.4" wrist (230 - 241mm) = Longside 160mm - Buckle side 100mm
    • 9.5 - 9.9" wrist (242 - 253mm) = Longside 165mm - Buckle side 105mm

UnbenanntA4FdvGkfmFSAR

reset
reset
reset

UnbenanntaOKhpWeBJ5HNg

Our saddle stitch guarantees maximum stability and durability. Our hand-stitched piece that uses the "running stitch" provides a stronger and more durable construction than the machine sewn piece that uses the "locking stitch". 

If a thread were to snap on a piece that uses a sewing machine, the entire line of thread could potential unravel allowing the two pieces of leather to separate. However in a hand-stitched piece, the thread will not unravel and the leather pieces will not separate from each other. More importantly, it's easier to repair the line of stitching.  

Watch straps, which are joined together with a saddle stitching, are made in careful and time-consuming manual work. 

This allows us to respond to individual peculiarities of the material and offer a better Premiun product.

Hand-made straps require a lot more skills, dedication and time as every single hole that needs to be punched very precise in the leather in order to sew the strap.

reset
reset
Reset configuration

Our shipping department is closed until February 4th.

Orders are of course still possible and the production continues as usual. Your order will be shipped at February 4th.

  • MAT10407
100% Handmade Canvas Strap ! 100% Canvas withouut letaher inlay. 100% Water Resistant!... more
Product information "CANVAS 05-BROWN"

100% Handmade Canvas Strap ! 100% Canvas withouut letaher inlay.
100% Water Resistant!

Length/Measurement/Weight

  • Thickness at Lugs 4mm  -  Thickness at Strapend 3.5mm
  • With 5 holes (up to 145mm)  - 6 holes (from 145mm)
  • The length and width can be defined by the configurator

Production method

  • Each hole is punched by a round awl an Double hand stitched with wax yarn
  • The buckle and the first keeper sit in a loop
  • A free (loose) keeper
  • Buckle type can be selected individually

Used materials

  • 100% cotton prewashed (Bio-Wash) made in Germany! 
  • Tearproof and stable wax yarn made in Italy!
Related links to "CANVAS 05-BROWN"
Minimo 2 Minimo 2
$122.00 * $183.00 *
A04 - Heat A04 - Heat
$122.00 * $164.70 *
Wildsuede01 Black Wildsuede01 Black
$244.00 * $268.40 *
Minimo 3 Minimo 3
$122.00 * $183.00 *
ROLSUB 18 ROLSUB 18
$244.00 *
Heritage03 Heritage03
$122.00 * $195.20 *
Viewed